background image

10

  English

Caution

In order to prevent accidents or injuries, 
keep in mind the weight of the appliance 
when selecting a storage location for it (see 
Specifications).

Prior to extended storage periods, as dur-
ing the winter, also observe the instructions 
in the Care section.

Park the machine on an even surface.

Engage the spray lance in its compart-
ment.

Insert the trigger gun in its holder.

Stow away the mains cable, the high-
pressure hose and accessory on the 
appliance.

Caution

Protect the appliance and its accessories 
against frost.

The appliance and its accessories can get 
destroyed through frost if there is any water 
residues in them. To avoid damage to 
them:

Completely drain all water from the ap-
pliance: Switch the appliance on with 
detached high pressure hose and de-
tached water supply (max. 1 minute) 
and wait, until no more water exits at the 
high pressure connection. Turn off the 
appliance.

Store the appliance and the entire ac-
cessories in a frost free room.

Danger

Turn off the appliance and remove the 
mains plug prior to any care and mainte-
nance work.

Prior to longer periods of storage, e.g. in 
the winter:

Remove filter from suction hose for de-
tergent and clean under running water.

Pull out the sieve in the water connec-
tion using flat-nose pliers and clean un-
der running water.

The appliance is maintenance free.

Use only original KÄRCHER spare parts. 
You will find a list of spare parts at the end 
of these operating instructions.

Special accessories expand the possibili-
ties of using your appliance. Please contact 
your KÄRCHER dealer for further informa-
tion.

Storage

Storing the Appliance

Frost protection

Maintenance and care

Care

Maintenance

Spare parts

Special accessories

Summary of Contents for K 2.325

















Reviews: