English 5.906-548.0 Rev. 00 (04/12)
83
Remove the boiler (see "Removing boiler").
Remove the separator walls from the boiler.
1 Cable screw connection
2 Splash guard
3 Nut
Loosen the cable screw connection.
Remove the spray guard.
Unscrew the nut (using an open wrench SW85 or
2“ pipe wrench).
Remove the heating element.
1 Specifications
2 Date of manufacture: Month/Year
Check whether all seals have been installed and
are seated correctly prior to assembly.
1 Spacer
2 Flange
Place the heating element into the boiler so that
the spacer is pointing toward the bottom of the
boiler.
Note:
The heater and the cables are soldered and cannot
be delivered as separate spare parts.
6.10 Removing the heating element
6.10.1Information for the assembly