66
Deutsch
5.962-786.0 Rev. 05 (06/13)
Container for detergent
Order no. 6.412-386.0
For the installation on the supply and at every output
of the cleaner's pipe network.
High pressure ball tap with short tap key, sleeve mod-
el
High pressure ball valve
Design 1
Casing made of galvanised steel
Connecting stub, handle, ball and switch shaft
made of stainless steel 1.4571
Stop disc and fastening parts made of stainless
steel 1.4301
Ball seal rings made of PEEK
O ring Viton
Design 2
Casing, connecting stub, handle, ball and switch
shaft made of stainless steel 1.4404
7.5.2
HD ball valve DN 7, R 1/4", brass
7.6
Accessories at the extraction point
7.6.1
High pressure ball tap at the extraction
location
A [mm]
83
B [mm]
115
C [mm]
62
E [mm]
90
F [mm]
R 1/2“
Wrench width H [mm]
32
Wrench width K [mm]
24
Nominal pressure
PN 315
Nominal width
DN 13
Order No.
6.412-066.0
