background image

– 1

WARNING 

When using this product basic precau-
tions should always be followed, in-
cluding the following:

1 Read all the instructions before us-

ing the product.

2 High pressure jets can be danger-

ous if misused. The jet must not be 
directed at persons, animals, elec-
trical devices, or the unit itself.

3 To reduce the risk of injury, close 

supervision is necessary when a 
product is used near children.

4 Know how to stop the product and 

bleed pressures quickly. Be thor-
oughly familiar with the controls.

5 Stay alert – watch what you are do-

ing.

6 Wear safety goggles.
7 Do not use acids, alkaline, solvents, 

or any flammable material in this 
product. These products can cause 
physical injuries to the operator and 
irreversible damage to the ma-
chine.

8 Do not operate the product when fa-

tigued or under the influence of al-
cohol or drugs.

9 Do not overreach or stand on unsta-

ble support. Keep good footing and 
balance at all times.

10 To reduce the risk of electrocution, 

keep all connections dry and off the 
ground. Do not touch plug with wet 
hands.

11 The Trigger Gun Safety Lock pre-

vents the trigger from accidentally 
being engaged. This safety feature 
DOES NOT lock trigger in the ON 
position.

12 Keep operating area clear of all per-

sons.

13 Close cover before operating the 

machine.

14 This appliance is intended for com-

mercial use.

15 Follow the maintenance instruc-

tions specified in the manual.

16 This machine has been designed 

for use with cleaning chemicals 
supplied or recommended by the 
manufacturer. The use of other 
cleaning chemicals may affect the 
operation of the machine and void 
the warranty.

17

HD 1.8/13 only:

 This product is pro-

vided with a Ground Fault Circuit In-
terrupter built into the power cord 
plug. If replacement of the plug or 
cord is needed, use only identical 
replacement parts.

18

HD 1.8/13 only

: Do not use exten-

sion cord with this product.

Injection hazard: equipment can 
cause serious injury if the spray 
penetrates the skin. Do not point 
the gun at anyone or any part of the 
body. In case of penetration seek 
medical aid immediately.

This system is capable of producing 
1300 psi/9 MPa.
To avoid rupture and injury, do not 
operate this pump with components 
rated less than 1300 psi/9,0 MPa 
working pressure (including but not 
limited to spray guns, hose and 
hose connections).

Before servicing, cleaning, or re-
moval of any part, shut off power 
and relieve pressure.

Do not spray electrical apparatus 
and wiring.

IMPORTANT SAFETY INSTRUCTIONS

4

EN

Summary of Contents for HD 4/9 C
















Reviews: