Kärcher A 2204, User Manual

Page: 7 / 92

English
7
„
When unpacking the product, make sure
that no accessories are missing and that
none of the package contents have been
damaged. If you detect any transport dam-
ages please contact your dealer.
Note: Please refer to page 2 for figures of the
appliance and the operation.
1 Carrying handle
2 ON/OFF switch for appliance
3 Blowing connection
4 Air regulation of the blowing function
5 Suction hose connection
6 Swivel casters
7 Accessory mount
8 Storage, power cord
9 Power cord with plug
A Suction hose
B Suction tubes 2 x 0.5 m
C Floor nozzle with hard surface insert
D Crevice nozzle
E Filter bag
F Swivel casters
Illustration
Î Remove the motor casing and take acces-
sories out of the container.
Illustration
Î You will find the swivel casters in the con-
tainer. The swivel casters must be mount-
ed on the appliance.
Illustration
Î
Connect accessories.
Illustration
Î
Plug in the main plug.
Î
Switch on the appliance using the ON/OFF
switch.
Always work with an inserted cartridge
filter - during wet as well as dry vacuum
cleaning!
Illustration
For a dust-free disposal of the vacuuming ma-
terial we recommend to insert the paper filter
bag as well. This provides the additional ad-
vantage that the cartridge filter will not become
contaminated that quickly.
Work only with a dry cartridge filter!
Î
Therefore : Always let the cartridge filter
dry thoroughly before using it!
Added filter bags can burst!
Î Therefore : Change the filter bag at the ap-
propriate time!
Always use a filter bag while sucking in
fine dust!
Caution:
Do not use a filter bag!
Immediately switch the appliance off if foam
forms or liquids escape!
Note: If the container is full a float closes the
suction opening and the appliance works at a
higher speed. Switch off the appliance immedi-
ately and empty the container
.
Use this function, for example, to blow out
leaves or dust from the garage, hobby room,
work shop, courtyard or garden.
Illustration
Î Connect connection hose. Open the slide
of the air regulation, and select the desired
blowing performance.
Illustration
Empty the container
Î
Turn off the appliance and disconnect the
mains plug.
Î
Remove the motor casing and empty the
container.
Illustration
Storing the Appliance
Î
Place the accessories in the appropriate
compartments at the appliance and store
the appliance in a dry room.
Commissioning and operation
Description of the Appliance
Accessories
Start up
Operations
Dry vacuum cleaning
Wet vacuum cleaning
Blowing function
Finish operation