K E E P E R
7.6.2.4.2
Blocking infected messages
In some cases, an administrator may want to block incoming infected
messages.
To set the program to block all incoming infected messages,
follow the steps:
1. On
the
masks
page (see subchapter 10.10.3.2), check the
Check this group
check box for the selected address
group.
2. On
the
administrator
page (see subchapter 10.10.3.4),
check the
Isolator
and the
Send notify
check boxes for
the
Infected
object type and select
Unchanged
from the
corresponding
Object action
drop-down list.
3. On
the
report
page, enable notification of the
administrators (for details refer to subchapter 10.10.6).
4. On
the
recipient
page (see subchapter 10.10.3.6), check
the
Block mail
check box for the
Infected
object type
and select
Unchanged
from the corresponding
Object
action
drop-down list.
7.6.2.4.3
Delivering only disinfected messages
To set the program to deliver disinfected messages to the
destination mailboxes and to block messages that it failed to
disinfect, follow these steps:
1. On
the
masks
page check the
Check this group
check
box for the selected group.
2. On
the
administrator
page:
•
check the
Isolator
check box for the
Infected
object
type and select
Unchanged
from the corresponding
Object action
drop-down list;
•
check the
Add report
check box for the
Cured
object type and select
Cured
from the corresponding
Object action
drop-down list.
83
