K E E P E R
7.6.2.3. To
check or not to check…
For every message sent by or delivered to users you may enable or disable
the message-processing mode. To do this:
1. On
the
groups
page (see subchapter 10.10.3.1), select the
required group name and press the
properties
button.
2. On
the
masks
page of the dialog window on your screen (see
subchapter 10.10.3.2), check the
Check this group
check
box and press the
accept
button in the right upper corner.
By default, all messages referred to the
default
group are checked
for viruses.
7.6.2.4. Defining
after-check
processing
of a message
7.6.2.4.1
Notifying the recipient
To set the program to notify a recipient about an infected
message, follow these steps:
1. On
the
groups
page (see subchapter 10.10.3.1), select the
required group name and press the
properties
button.
2. On
the
recipient
page of the dialog window on your screen
(see subchapter 10.10.3.6), check the
Add report
check
box for the objects
Infected
and press the
accept
button
in the right upper corner.
3. On
the
report
page (see subchapter 10.10.6), select
recipient
from the list of notification recipient types and
press the
properties
button.
In the dialog window on your screen, define the required settings and
enter the text of notification (for details refer to subchapter 10.10.6.4)
and press the
accept
button.
You may define the type of notification to be sent to the message recipient:
•
notification of an infected message (see Figure 2);
79