AR1840 Wi-Fi Router
2. Quick Mesh Setup : Option #1
To set up AR1840 Master and Slaves:
Lagacy GW
- 2 -
1
2
4
Step 1.
Step 2.
Step 3.
Step 4.
Step 5.
Step 6.
Step 7.
Step 8.
Connect your legacy GW to the WAN 2.5G port on your AR1840 using the included
Ethernet cable.
Connect your AR1840(Master) to a power source.
Wait for the AR1840 master’s Power LED to light solid green and the 2.4G, 5G and 6G LED
lights solid green.
Place the AR1840 slave about 3 meters from the AR1840 master. Connect the AR1840
slave to a power source.
Wait for the AR1840 slave's power LED to light solid green and the 2.4G, 5G and 6G LED
lights solid green.
Wait for the AR1840 INTERNET LED to light solid green to all connected the AR1840 slaves.
Wait for about 3-4 minutes until mesh pairing is complete and the AR1840 slave's INTERNET LED
lights solid green
Place your mesh extender(s) in the desired location(s) in the household and ensure that
the Signal LED stays solid green.
Note: You’ll get the best signal when it is in an open space like on a shelf or a table.
3