Kantronics MT1200, User Manual

Page: 151 / 157

been acted on before a syntax error near the end of the line is reached. When
this occurs, “Input ignored” is used to show what part of the line was ignored. The
dollar sign points to the boundary: characters to the left were used; the character
pointed to and those to the right were not, i.e., the line was parsed as if a <CR>
was entered at the $. For example:
BUDLIST QST,KBØNYK NØKN
$
Input ignored
Because the comma is missing, the command is interpreted as if it were
BUDLIST QST,KBØNYK; the NØKN callsign is ignored.
KANTRONICS MT1200 VERSION 06228-1.0
SERIAL NUMBER 0000000101
(C) COPYRIGHT 2006 BY KANTRONICS INC. ALL RIGHTS RESERVED.
DUPLICATION PROHIBITED WITHOUT PERMISSION OF KANTRONICS.
cmd:
A message such as this (different for each product, but with this format) appears
when the TNC is first turned on and after any soft reset, including changing the
MYREMOTE commands, or issuing the RESET command.
Link state is:
This message is output in response to the CONNECT and DISCONNECT
commands if the state of the link does not permit the requested action. It is
prefaced by “Can’t CONNECT” or “Can’t DISCONNECT” as appropriate and will
be followed by the current link state. A CONNECT command with no options will
display the current link state.
Current link states are:
Both devices busy
Both TNCs involved in the connection are unable to accept any more data.
CONNECTED to (callsign v path)
Your TNC is currently connected to the indicated station, using the path given.
CONNECT in progress
Your TNC is attempting to establish a connection.
Device busy
Your TNC is unable to accept any more data from the remote station at this time.
DISC in progress
Your TNC is attempting to disconnect from another station.
DISCONNECTED
No connection exists.
FRMR in progress
143