INSTALLATION MANUAL OPERATION MANUAL
KANNAD 406 AP-H
PAGE 107
JUL 24/2013
6. Technical Specifications
TYPE
• Three-frequency ELT
(121.5 / 243.0 / 406.025 MHz)
• Automatic fixed
• COSPAS-SARSAT Class II
(-20°C to +55°C).
406 MHz TRANSMISSION
• Frequency: 406.025 MHz+/-2 kHz
• Output power: 5W (37 dBm +/- 2 dB)
• Modulation type: 16K0G1D (Biphase
L encoding)
• Transmission duration:
440ms (short message) every 50
sec. compatible with long message
transmission (520ms)
• Autonomy: Over 24 hours at
-20°C
121,5/243 MHz TRANSMISSION
• Frequencies:
121.5 MHz +/- 6 kHz
243.0 MHz +/- 12 kHz
• Output power:100 to 400 mW
(20dBm to 26 dBm)
for each frequency
• Modulation type: 3K20A3X
• Modulation rate: between 85 and
100%
• Frequency of modulation signal:
1420 Hz to 490 Hz with decreasing
sweep
• Autonomy: Over 48 hours at
-20°C
CONTROLS
• ARM / OFF / ON switch
• Bright red visual indicator
• BNC antenna connector
• DIN12 connector for remote control
panel (RCP) and pin programming
option.
• Buzzer
G-SWITCH SENSOR
Mechanical G-switch sensor at 45°
compliant with EUROCAE ED62
specifications.
BATTERY
KIT BAT300, P/N : S1820516-99
3 x LiMnO
2
D type cells for transmitter
power supply
Replacement every 6 years
HOUSING
Material: Molded plastic
Color: Yellow (color compounded)
Transmitter dimensions:
172 mm x 82 mm x 82 mm
Overall dimensions:
max 290 mm x 115 mm x 95 mm
Weight: typical 1235 g / max 1300 g
(including battery)
Tightness: O-rings
ENVIRONMENTAL CONDITIONS
RTCA DO-160D / EUROCAE Ch1 to 25
[D1]XBA[ED62][YLMC]AWXXXXZXXXZ
WL[(A1)(A2)(A3)XX]XXA
Note: chapters 6, 8, 9 & 10 according to
DO160C.
QUALIFICATIONS
ETSO-2C91a & ETSO-2C126
(EUROCAE ED62)
TSO-C91a & TSO-C126 (RTCA DO183 &
DO204)
