The Kanguru Wireless LAN Quick Start Guide 1
Installation of the Kanguru Wireless LAN is dependent on the
operating system. Please follow the instructions carefully to make
sure you are taking the appropriate steps for your operating system.
Windows 98 SE users must first install the Flash Driver (Steps 1
to 3 below). All other users do not need to install the Flash
Driver.
Install the Flash Driver
(Windows 98 SE Only)
Step 1: Plug-in the Kanguru
WLAN first and choose
Search for the best driver
for your device
when the
wizard begins, then click
Next
.
Step 2: Uncheck the box
CD-
ROM drive
and check the
box
Specify a location
.
Choose E:\KanguruWireless
LAN\Flash Driver, where E is
your CD-ROM drive letter.
Click
Next
to continue.
Step 3: The wizard will find the
location of the driver to be:
E:\KanguruWirelessLAN
\FLASHD~5\USTORAGE.INF
Click Next then
Finish
to
complete the Flash Driver
installation.
Install the WLAN Driver / Utility
A. Insert the installation CD into
your CD-ROM drive. The setup
program will start automatically.
B. Click
Next
to begin the setup.
C. Select the destination folder.
To install to the default folder as
shown on the right, click
Next
to
continue.
