51
Kangook Paramotors User Guide –
February 2020 – V3.0
Copyright 2020 All Rights Reserved.
5.
Pre-flight check
Harness
Pouches properly closed
Straps and aluminium buckles are properly attached
The top and bottom of the harness are attached to the arms.
Frame and cage
Cage sections are attached by central straps.
All velcro straps are snug and wrapped in place.
Proper distance between the propeller and the cage. Use 120cm Propeller for 132cm
cage and 125cm or 130cm propeller for 146cm cage.
Check netting tension (if applicable).
Check Shackle pins and starter pulley
Motor
Check the rubber mounts for both the Motor supports and exhaust system
Check that the Muffler has no cracks or leaks and for proper , spring tension
Gas tank has no leaks and the fuel cap is closed
Check hoses for leaks and not slack near the exhaust
Carburetor and airbox firmly attached to the frame
Spark plug is properly screwed into the motor and that the sparkplug resistor cover is
firmly attached
Propeller and axle screw check Ensure they are not loose and when running that
there is no unusual sound when rotating.
Check that the propeller lading edges and r tips are in good condition
Gas handle: easy to squeeze closed to the slow position. Ensure the stop button (kill
switch) is functional.
Ensure the Cruise control off (if one is used)
