45
Service and Repair Manual
Model 710/760
Fig. 92
Assembling
the handle
halves and
speed control
switch
1.
Fit handle half (5) to lower assembly.
2.
Fit lower cord clamp (8), and terminal block ((123)
760KV/SV) ((143) 760 MV) to handle (5).
3.
Fit cable and cord protector.
4.
Fit switch (24) and speed control (10) to handle (5)
and connect wires. Connect wires from RTR loom
to switch (24) and terminal block (126).
5.
Fit foam slug (9), upper cord clamp (7) and bellows
assembly to handle (5). Position handle (6) and
secure with four screws (2)
torque to 1.8Nm
.
6.
Fit cushion grip (1) and secure with one screw (2)
torque to 1.25Nm
.
2
3
9
8
4
7
2
5
6
2
1
24
10
12
26
28
27
11
123 (760KV/SV)
143 (760MV)
1.
Route RTR loom (26) through lower handle cover
(13) and position grommet.
2.
Secure with retaining plate (28) and screw (27)
torque load to 0.7Nm.
3.
Fit pivot isolators (15).
Assembling
the lower
handle
Fig. 91
1.
Fit upper handle cover (23) and secure with two
screws (22)
torque load to 1.8Nm
.
2.
Slide up rear handle assembly, taking care to
locate module (21) within upper handle cover.
3.
Secure with lower handle screw (14)
torque
load to 1.8Nm.
4.
Fit washers (18) to screws (17) and use to secure
bellows
torque load to 4Nm.
Assembling
the handle
covers
Fig. 93
14
18
23
22
17
21
13
15
15
27
28
26
Summary of Contents for 710 Series
Page 1: ......
