36
Service and Repair Manual
Model 710/760
B
E
A
D
F
G
E
H
A
B
F
G
C
H
C
D
Service and Repair Manual
Model 710BV/KV/MV
1.
Fit upper handle cover (23) and secure with two
screws (22)
torque load to 1.8Nm
.
2.
Slide up rear handle assembly, taking care to
locate module (21) within upper handle cover.
3.
Secure with lower handle screw (14)
torque
load to 1.8Nm.
4.
Fit washers (18) to screws (17) and use to secure
bellows
torque load to 4Nm.
Assembling
the handle
covers
Fig. 66
14
18
23
22
17
Assembling
the speed
control switch
and handle
Fig. 65
2
3
9
8
4
7
2
5
6
2
1
24
10
12
26
28
27
11
115 (710KV/BV)
126 (710MV)
1.
Route RTR loom (26) through lower handle
cover (13) and position grommet (16).
2.
Secure with retaining plate (28) and screw (27)
torque load to 0.7Nm.
3.
Fit pivot isolators (15).
Assembling
the lower
handle
Fig. 64
1.
Fit handle half (5) to lower handle assembly.
2.
Fit lower cord clamp (8), and terminal block
(126) to handle (5).
3.
Fit cable and cord protector (11 & 12).
4.
Fit switch (24) and speed control (10) to handle
(5) and connect wires. Connect wires from RTR
loom to switch (24) and terminal block (126).
5.
Fit foam slug (9), upper cord clamp (7) and
bellows assembly to handle (5). Position handle
(6) and secure with four screws (2)
torque load
to 1.8Nm.
6.
Fit cushion grip (1) and secure with one screw
(2)
torque load to 1.25Nm.
15
15
13
26
28
27
21
24
20
26
115 KV/BV
116 MV
BROWN
BLUE
BROWN
BLUE
Summary of Contents for 710 Series
Page 1: ......
