KanexPro MX-HDBASE6X6-4K, Manual, Page: 12 / 42

KANEXPRO MX-HDBASE6X6-4k
7 | P a g e
directionally between MX-HDBASE6X6-4K and far-end receivers.
7)
MX-HDBASE6X6-4K can collect IR signal sent by the included IR remote via its
built-in IR sensor or through external IR receiver connected to the IR IN/ IR EYE/ IR
ALL IN port. The IR signal can be transmitted bi-directionally between MX-
HDBASE6X6-4K and far-end receivers.
8)
Connect a DC 24V power adapter and the MX-HDBASE6X6-4K.
Note:
1.
Connect HDBT ports of MX-HDBASE6X6-4K and far-end receiver with straight-
through cable.
2.
IR receivers connected to IR IN& IR ALL IN should be with carrier. If not, send
command %0900. or %0901.to activate native carrier mode or force carrier mode
in the IR matrix launched between MX-HDBASE6X6-4K and far-end receivers.
3.5
Connection with HDBASE70POER
MX-HDBASE6X6-4K boasts 4 HDBaseT output ports which support PoC solution.
Connect the HDBT output ports of MX-HDBASE6X6-4K to HDBaseT Receivers
supporting PoC (like HDBASE70POER) via twisted pair. Plug a power supply to the
power port of MX-HDBASE6X6-4K, the HDBaseT Receivers will be energized
synchronously with PoC solution.
Po
C
DC 24V
TPHD402PR(PoC)