![background image](http://html1.mh-extra.com/html/kandk-sound/pure-resonator-bb/pure-resonator-bb_product-manual_3073153001.webp)
92798 Cape Arago Hwy, Coos Bay, OR 97420 | 541-888-3517 | Toll Free 1-800-867-6863 | www.kksound.com
P R O D U C T M A N U A L
P U R E R E S O N A T O R B B
The Pure Resonator BB is designed especially for biscuit bridge resonator guitars. It features a screw-mounted
pickup for maximum feedback resistance and best possible sound transmission.
The jack can be mounted externally or internally. The pickup comes pre-wired with an endpin jack including an
external mount fastening system called “dual-lock”. The jack can also be mounted internally if you remove the
dual-lock. An optional internal flush mount nylon jack is supplied as well.
This manual is split up in two parts: pickup and jack installation. The pickup installation
procedure is the same for both external and internal jack-mount; only the orientation of the
cable is different.
PICKUP INSTALLATION
1.
Remove the strings or loosen them and install a capo on the 10th fret.
2.
Remove the string holder by unscrewing the strap knob.
3.
Unscrew the small screws of the resonator cover and remove the cover.
4.
Take out the resonator cone with the biscuit bridge.
5.
Unscrew the biscuit bridge holding the screw on the back of the resonator and
remove the biscuit.
6.
Mark a hole location for the pickup mounting hole (see photos, right).
7.
Drill a 3/32 (2.1 mm) hole through the biscuit.