Drive
46
Parking Brake
Operation
Operate the parking brake
Release the parking brake
Operate the parking brake
−
Pull up the parking brake handle with force, and do not press
the button when pulling it up.
Release the parking brake
−
First pull up the parking brake handle and press the button at
the same time. and push the brake lever down to the bottom
under the condition that the button is pressed.
Warning !
Make sure to completely disengage the parking brake to turn off
the brake warning light prior to driving. only partially releasing
the parking brake will cause the brakes to overheat, which will
negatively affect the function of the brake system and cause a
danger of accident !
Parking
Operate based on following methods to prevent the car from
moving unintentionally after parking.
Parking
−
Stop the car with the foot brake.
−
Apply parking brake tightly.
−
Push the shift lever to the neutral position.
−
Turn off the generator.
Park either on an uphill or downhill road.
−
Fully tighten the parking brake, and then move the manual
transmission shift lever on the car to the first gear position
(when parking uphill) or reverse gear position (when parking
downhill). When parking on the slope, it is best to add wheel
chock to ensure safety.
