Nesis III User’s Manual
8.3
Settings
Figure 62:
User options.
In the case of partial translations, the missing translations will appear
in English language.
Time zone
Specify the difference between local time and UTC time. Spec-
ify zero in order to show the UTC time everywhere. In majority of
cases the difference is given in whole hours. However, some time zones
also require the minute part. For example, Eucla in Australia is using
UTC+8:45. In this case, set hours to 8 and minutes to 45.
Use 314 password
Some people hate our 314 protection password. To turn
the password off, set this option to
no
.
Aircraft designation
Enter aircraft registration number.
Depending on the Nesis model, some short-cut actions can be assigned to
individual buttons:
User
default action opens list of nearest airfields.
User long
default action issues the
Waypoint
command.
Pager long
default action issued the
Logbook
command.
External
is not used by default. In fact external button is usually not con-
nected to Nesis. When it is connected, it is typically set to deactivate
autopilot.
87
©
Kanardia
2018-2022
