Nesis III User’s Manual
8.11
Maps
8.10.3
Transfer
This option is shown only, if the second Nesis is detected on the bus. This
command will transfer all user waypoints from this Nesis to the other. Any
existing user waypoint on the other Nesis will be overwritten.
8.10.4
Delete all
The
Delete all
command deletes all user waypoints in one step. A confirmation
is required.
8.10.5
Delete unnamed
This command deletes all user waypoints that have no name assigned. These
are typically markers, which name has not been changed to something mean-
ingful.
8.10.6
Waypoint Edit/Delete
When a waypoint from the list is selected it can be either deleted or edited.
No confirmation is required in the delete case. When
Edit
option is selected,
a window shown on Figure 75 is opened. See section 8.10.1 for details.
8.11
Maps
The
Maps
icon is used to copy certain helper files from the USB stick into
the system. Such files are various maps, airspace database, license files, etc.
Figure 76 shows available options.
Copy
copies a file with
kus
,
ras
,
nam
or with
lic
extension from an USB
memory stick. All these files are in Kanardia specific format. A new
window appears asking for intended copy action, Figure 77. Vector
maps have
kus
extension, raster maps use
ras
for the maps and
lic
for licenses and approach maps expect
nam
extension.
Each copy is a two part process. First, Nesis checks the integrity of
the file and if the check passes, the file is copied. Usually, a restart is
required after the file copy has been completed.
Please note that you can’t use the copy command for the system up-
date, although the update file has the correct extension. Use the
Update
icon instead.
102
©
Kanardia
2018-2022
