Emsis — Manual
5.3
Maps Screen
received with the instrument. (You may use other micro SD cards
as well.) Do not put the maps into any folders. It is very important
that you use
safely remove
option on your PC before you remove the
card from it. Once you have a map on the micro SD card, do the
following:
Insert the SD card into Emsis with the contacts facing up.
Select the
Setup
screen,
Maps
|
Copy Maps
option.
If asked, enter standard password
314
.
A list of the maps on the SD card appears. Select a map you
want to copy and press the
OK
button.
Copy procedure commences. Copying is very slow in Emsis. A
large file may take a few hours to copy. Please make sure the
batteries are full before you begin. Copying is finished when
the red progress bar turns into green. Please note that it may
take some time before the progress bar appears.
Some proprietary maps require a special license file for the final ac-
tivation. The same copy principle is used for them, too. Figure 10
shows an example of map copying.
5.3.4
Deleting
It is wise to remove unused maps from the system. This speeds up
initial map loading procedure.
Select the
Setup
screen and choose
Maps
|
Delete Maps
option.
A list of maps appears. Select the map you want to delete and
press the
OK
button.
This removes the map from internal memory.
29
©
Kanardia
2021