Aetos Installation Manual
11. Service Settings
Figure 52:
Configuration of the echoUAT device.
11
Service Settings
The
Settings
icon in the service page opens access to several configurations
options, which significantly affect Aetos behaviour and outlook.
11.1
Parameters
It is recommended that engine sensors and corresponding Daqu channels are
set before parameter specific values are defiend. See also section 13 and
Daqu
or miniDaqu manual.
The
Parameters
window is used to set and tune name, range and color limits
for different parameters used by Aetos. Figure 53 shows the options.
These options have the following meanings:
Edit (Engine, Electric, ..., Other)
opens a selection list where one
parameter is selected and then edited. This allows tuning of individual
55
©
Kanardia
2019–2020
