ULTRAFLOW® 54/34
Kamstrup A/S · Technical description · 5512-2464_A1_GB_08.2019
37
7.2
Orientation of ULTRAFLOW® 54/34 (mounted separately)
The recommended orientation of the flow sensor in an installation takes into account the metrological sensitivity of the
flow sensor to orientation, for example because of orientation-dependent flow profiles; poor water quality of district
heating/cooling water, e.g. dirt, which can accumulate in the flow sensor; air in the system and environmental
requirements, for example in case of condensation. The recommendations may vary for each of the types because of
their diversity in the design.
ULTRAFLOW® can be mounted vertically, horizontally or at
an angle.
For vertical mounting, ULTRAFLOW® can with advantage
be turned ±360° around the pipe axis.
Important!
The plastic casing should be placed on the side (at
horizontal mounting).
Figure 16. Separate mounting of ULTRAFLOW®. Vertically, horizontally or at an angle.