background image

PowerKon QE

Assembly, installation and operating instructions

6

2

Safety

This section provides an overview of all important safety aspects to ensure optimum protection of personnel as well as safe
and trouble-free operation. In addition to the safety instructions in these operating instructions, the valid safety, accident pre-
vention and environmental protection regulations must be observed for the area of use of the unit. It is the duty of the oper-
ator to ensure that instructions relating to maintenance (e.g. relating to hygiene) are complied with.

2.1

Correct use

Intended use of the unit also includes adherence to these instructions.

Information in accordance with EN60335-1

This unit can be used by children aged 8 years or more and also by people with reduced physical, sensory or mental cap-
abilities or a lack of experience and knowledge, if they are supervised or have been instructed in the safe use of the unit
and the resulting dangers. Do not allow children to play with the unit. Do not allow children to clean and maintain the
unit without supervision.
This unit is not intended for permanent connection to the drinking water supply system.
This unit is intended for being accessible to the general public.

Any use beyond or other than the stated intended use is considered as misuse.

Any change to the unit or use of non-original spare parts will cause the expiry of the warranty and the manufacturer’s liabil-
ity.

2.2

Limits of operation and use

Limits of operation

Min./max. water temperature

°C

-

Min./max. air intake temperature

°C

15-40

Min./max. air humidity

%

15-75

Min. operating pressure

bar/kPa

-

Max. operating pressure

bar/kPa

-

Min./max. glycol percentage

%

25-50

Tab. 1: Limits of operation

Operating voltage

230 V/ 50/60 Hz

Power/current consumption

On the typeplate

Tab. 2: Operating voltage

Summary of Contents for PowerKon QE





































Reviews: