Kampmann PowerKon nano, Assembly, Installation And Operating Instructions

Page: 22 / 44

PowerKon nano
PowerKon nano
Assembly, installation and operating instructions
22
7 Electrical connection
IMPORTANT NOTE!
Provide an all-pole mains separator in the electrical installation on site that can be reliably secured to avoid
the system being reconnected (e.g. a lockable switch with a contact opening of at least 3 mm up to a rated
voltage of 480 V). No protective measures are indicated in the wiring diagrams. These must be provided
when installing the system and when connecting the units in accordance with VDE 0100 and the regulations
of each energy supply company.
7.1 Maximum electrical rating values
PowerKon nano, electromechanical model 24 V (*24)
Overall
length Fans Nominal
voltage Mains fre-
quency Nominal
power Nom-
inal
current Leakage
current Ri ana-
logue in-
put Protection
rating Protection
class
950 mm D30R4000 24 VDC - 5 W 0.21 A < 3.5 mA 200 kΩ IP21 III
1150
mm
D30R3300 24 VDC - 6 W 0.22 A < 3.5 mA 200 kΩ IP21 III
1400
[mm]
D30R4400 24 VDC - 6 W 0.23 A < 3.5 mA 200 kΩ IP21 III
1800
[mm]
D30R4400 24 VDC - 7 W 0.26 A < 3.5 mA 200 kΩ IP21 III
2150
[mm]
D30R4443 24 VDC - 8 W 0.33 A < 3.5 mA 200 kΩ IP21 III
Tab. 4: Maximum electrical rating values, electromechanical model 24 V
PowerKon nano, electromechanical model 230 V (*00)
Overall
length Fans Nominal
voltage Mains fre-
quency Nominal
power Nom-
inal
current Leakage
current Ri ana-
logue in-
put Protection
rating Protection
class
950 mm D30R4000 230 V AC 50 Hz 5 W 0.21 A < 3.5 mA 200 kΩ IP21 I
1150
mm
D30R3300 230 V AC 50 Hz 6 W 0.22 A < 3.5 mA 200 kΩ IP21 I
1400
[mm]
D30R4400 230 V AC 50 Hz 6 W 0.23 A < 3.5 mA 200 kΩ IP21 I
1800
[mm]
D30R4400 230 V AC 50 Hz 7 W 0.26 A < 3.5 mA 200 kΩ IP21 I
2150
[mm]
D30R4443 230 V AC 50 Hz 8 W 0.33 A < 3.5 mA 200 kΩ IP21 I
Tab. 5: Maximum electrical rating values, electromechanical model 230 V