6
Kachinko System
7
Kachinko System
right (as you look from the front):
Operation
Locate the unit where the front light is clearly
visible by the camera.
• Make any necessary connections from the
TONE OUT
to the camera, if you are not us-
ing the camera’s microphone.
• If you are recording the signal with the
camera microphone, set the
POWER
switch
to
ON (BUZZ)
, otherwise set it to
ON
.
• Set the camera iris setting to manual. An
automatic setting can overcompensate for
the KS-1018’s lighting, and make it impos-
sible to see the “clapperboard” effect on
the target monitor.
• Make the image of the front light as large
as possible by putting the camera close in
front of the KS-1018. The focus of the cam-
era is not important in this case.
Set the
MODE
switch to
AUTO
. The main light
lights, and the beep sounds (or the signal is
output through the jacks). The three red LEDs
