background image

4

IMPORTANT SAFETY INSTRUCTIONS
FOR CHARGER & BATTERY PACK

Caution:

 To reduce risk of injury, charge only specific type rechargeable  

battery packs. Other types of battery packs may burst causing personal  
injury and damage.

2  Before using charger, read all instructions and cautionary markings  

on battery packs and chargers.

3  Do not expose charger to rain or snow.
4  To reduce the risk of damage to electric plug and cord, pull by plug rather 

than cord when disconnecting charger.

5  Use of an attachment not recommended or sold by the charger manufacture 

may result in a risk of fire, electric shock, or injury to persons.

6  Make sure cord is located so that it will not be stepped on, tripped on, 

tripped over, or otherwise subjected damage or stress.

7  Do not operate charger with damaged cord or plug.  

Replace them immediately.

8  Do not operate charger if it has received a sharp blow, been dropped,  

or otherwise damage in any way, take it to qualified center.

9  To reduce risk of electric shock, unplug charger from outlet before  

attempting any maintenance or cleaning. Turning off controls will not  
reduce this risk.

10  Do not disassemble charger or battery pack, take it to a qualified service 

center while repair is required. Incorrect reassembling may result in a risk  
of electric shock or fire.

Summary of Contents for K 10640













Reviews: