1. Introduction to the Manual
2. General Precautions
"
The purpose
of this manual is to provide the
necessary information for competent, safe use of
the equipment.
"
This information
is the result of continuous,
systematic data processing and technical tests
recorded and validated by the manufacturer, in
accordance with the internal procedures to
ensure the safety and quality of information: EN
89/392, EN 60204-1, CEI 110-8, IEC 801, EN
202-2, EN 418, prEN 1050, prEN 614-1.
"
The information below
is intended
EXCLUSIVELY for specialized users, capable
of interacting with the product with the utmost
safety for people, the machine and the
environment, interpreting basic diagnostics of
problems and malfunctions and performing
simple checks and maintenance, in full
compliance with the instructions given in the
pages that follow and with current health and
safety regulations.
"
The document
does not examine in depth the
topics of disassembly and extraordinary
maintenance, as these operations must always be
carried out solely by our authorized Technical
Service.
"
For a proper
relationship with the product, it is
essential to ensure that the manual remains
legible and well-preserved, for future reference.
Should it deteriorate or, more simply, for further
technical and operating information, contact the
nearest Authorized Retailer directly.
"
Before using
the machine or opening its
packaging, read the instructions in the following
manual very carefully.
"
If the machine
is used by more than one
operator , each one must adhere to the following
manual very carefully.
"
The Manufacturer
declines any responsibility
for damage to persons, things or to the machine
itself arising from its incorrect use, negligence
and superficial interpretations of safety concepts
contained in this manual.
"
This instructions manual
should serve the
duration of the machines operating “life” and be
available for at least
10 (ten) years
: it is
advisable to keep it in a known and accessible
place (possibly together with the other manuals
relating to the machine).
Always make sure in advance that the minimum
safety, placement and operating standards are
respected, taking note of the environmental
conditions, temperature, humidity, lighting,
vibrations, suspended dust and the appropriateness
of the area to be occupied.
The saw may operate outdoors (work sites, open
spaces in general, etc.) or indoors (workshops,
laboratories, etc.) where there is no risk of
explosion or fire.
Before using the equipment, make sure that the
surface where the machine will be placed is flat,
and stable.
Always make sure in advance that the workpiece is
tightly clamped; in any case, make sure that the
start of the production cycle does not create
hazardous situations for people and/or property.
It is strictly forbidden to cut pieces of
any material whatsoever, which are not
previously and properly tightened in the
vise. Always load and unload with both hands.
Keep the cutting area (blade and clamp) along with
cooling liquid introduction area perfectly clean.
Do not remove or damage the information plates on
the machine; you must recognize their meaning and
keep the message legible. Should they deteriorate,
replace immediately, contacting only an authorized
Technical Service directly.
The use of spares that do not respond to the
specifications listed below, changes or tampering -
however slight- shall exempt the manufacturer from
any responsibility regarding the proper use,
functioning and safety of people and/or property.
It is strictly forbidden to tamper with safety
equipment and/or devices.
Always disconnect electric voltage at the end of
each job.
Dispose processing waste in compliance with
current regulations.
