Kaltenbach KPS 501, Manual

Page: 26 / 268

KPS SERIES Machine Information
M-UK-KPS--06
11/02/03 Page 26 of 138
KALTENBACH
1.2.14 Product output table
Features
•
Because of tumbling of the material at last product with minimal desired rest
length, it is necessary to put in this output table.
• Output table executed in solid steel construction.
• Program controlled movement of the table in X-direction via servo motor to
pick-up good pieces. The table remains in the home position when cutting trim
or remnant pieces which fall via a chute into a container after the shearing
process.
• Pneumatically controlled lowering of the output table during the shearing
process to assure optimum pick-up of good pieces.
Specifications
Working height .......................................................................... mm 1050
Maximum material width ............................................................. mm
500
Table length .............................................................................mm 4000
1.2.15
Product push-off device
• The product output table will be equipped with a push-off mechanism to push-
off longer material lengths onto material stillages (to be provided by customer).
• This function is automatically or manually controlled by the operator from the
operating panel.