Kalmar DRD450-80S4X, Maintenance Manual

Page: 589 / 600

UDRF01.04GB
Maintenance manual DRF 400–450
G Terminology and index – Terminology and index 3
mm mm mm mm
Terminology and index
page –
Terminology
Term Description
Accumulator Reservoir that stores (accumulates) pressure for i.e. hydraulic functions.
Anti-corrosion compound Prevents oxidation, in simple terms, rustproofing.
Attachment Part of the machine that grabs the load when lifting.
Axle distance Distance between drive axle and steering axle.
Bar Unit to express pressure.
Battery disconnector Cuts off current from battery.
Boom Lift beam moveable vertically and in-out. Bracket for attachment.
Bottom lift attachment “Lift legs” that can be raised/lowered for handling loads. Grabs load from below.
Buzzer Acoustic alarm to catch the operator’s attention.
Control valve Valves that can be used to control something, for example, to release pressure and
thus lower a boom or a fork. See also control valve.
Daily inspection The actions that should be performed daily to ensure the machine’s functionality.
Decitonne Tenth of a tonne, measure of the machine’s lift capacity.
Display “Window” showing digital information on steering wheel panel in cab.
Drive axle Driving axle that receives the torque from the drivetrain.
Drivetrain Parts in machine involved in power transmission; engine, torque converter, transmis-
sion, propeller shaft and drive axle with differential and hub reduction.
Dust reservoir The air filter collects the coarsest particles in a dust reservoir, emptied automatically
during operation.
ECC Electric Climate Control. Climate unit with thermostat-controlled cooling, dehumidifi-
cation and heating.
EHC Electric Heat Control. Heater unit with automatic heat control.
Electrolyte level Fluid level in battery cells.
Environmental waste Used oils, filters, etc., must be handled according to governing national laws and reg-
ulations.
Expansion tank Tank for coolant.
Fixed displacement Pump with fixed pump volume.
Hanging load Lifted load.
Hub reduction Type of final drive (often next to drive wheel) that reduces rpm and increases torque
from the drivetrain.
Hydraulic oil Oil for hydraulic system. See specifications in section F Technical data .
Hydraulic oil pump Pump in hydraulic system.
https://www.forkliftpdfmanuals.com/