OPERATION
A. Forced cleaning: when the steam generator works for 80 hours in total, the washing procedure
shall be performed. Long press the water shortage button for 5 seconds, and then the solution
cleaning procedure shall be entered. After the end of the long press 0,5 seconds to clean the mode,
after the end of the normal use of steam function.No cleaning operation steam flash display CLER,
During cleaning, CLER flashes once every second. After cleaning, the steam generator
accumulates the working time, clears the zero and starts the accumulative time again, reaching 80
hours Cleaning procedures should be enforced,
3. When the water box is filled, remember to cover the water tank.
* Please refer to the instructions provided in the section Cleaning and Maintenance to clean the
product and accessories.
B. Set the work menu to confirm the start of work. One "drip drip" signal indicates that the work has
started, and three "drip drip drip drip" signals that the work is finished. C. During the working
process or in other cases except standby state, after opening/closing the door, the bee island
device "drops" to prompt the door to open or close;
Keep pipes clean and sanitary.After the end of the normal use of steam function. Pay attention to
the top:
5. Please clean the water tank often. To ensure the best cooking results, thoroughly clean and dry
the oven chamber and its accessories such as baking tray, grease tray, pizza tray, etc. after each
steam oven is cooled.
4. After cooking, please empty the water box and wipe it completely to prevent bacteria and scale.
B. General cleaning: when the machine has not been used for a long time or for a period of time,
long press .5 seconds in standby state to start the clean water cleaning procedure for cleaning the
steam generator pipeline.
1. Remove all packaging and accessories, and clean and dry all accessories including water
storage boxes
3. Run cleaning mode once.
2. Do not use water containers to hold other liquids.
For the first time to use
1. Please try to use distilled water or filtered drinking water, avoid using mineral water, which can
effectively prevent the generation of scale.
4. After the work is finished, clean the furnace cavity when the temperature in the furnace is
lowered.
10. Cleaning function:
2. Pour water into the water storage box and install the water storage box.
14