Kaleidescape, Inc.
July 22, 2010
This document is for informational purposes only. Kaleidescape makes no representations or warranties, express or implied, regarding the accuracy or completeness of the information
contained herein and Kaleidescape shall have no obligation to provide updates to this information in the future. Copyright © 2010 Kaleidescape, Inc. All rights reserved. Kaleidescape is
a trademark of Kaleidescape, Inc. and is registered in the United States and certain other jurisdictions. Kaleidescape Part No. 101-0142-00 Rev 1.
Instructions for SVC-KIT-0010
Title
Movie Player (KPLAYER-2500) Power Supply and Fan Replacement
Time to complete
1
hour
Procedure to complete
Locate Parts and Tools
Service Kit Parts
Power supply
Fan
Fan bracket screws (2) with nuts (2)
Security screw bit
Tools
Required
Phillips screwdriver
Driver for security screw bit
Flathead screwdriver
Box knife
Clean, dry cloth
Canned air (multi-purpose duster safe for electronic circuitry)
Electrostatic discharge (ESD) wristband or other ESD protection
Open and Clean Chassis
1.
. Turn off player.
2.
Disconnect all cables including the power cord.
3.
Remove from rack
