manualshive.com logo in svg

Kaleidescape premiere series, Installation Manual

Share
Download
Kaleidescape premiere series Installation Manual Download Page 175

Kaleidescape Premiere Line Installation Guide

Installation Checklist 

 

Kaleidescape Part No. 101-0105-00 Rev 5

Page 175

selecting the correct zone.

Check audio and video on each player for optimal performance. Manually configure 
the audio or video signal when necessary.

Refer to:

HDMI and the Kaleidescape System Technical Note

Choose a CinemaScape mode and set up screen masking settings when a projector 
with a screen masking system is connected to a player.

Refer to:

CinemaScape Technical Note

Configure language preferences for each player. 

Click the 

Settings

 button on the 

Components

 page and open the 

LANGUAGE

 tab to 

choose preferences.

Change the DVD region if necessary. Contact your dealer or Kaleidescape Support if 
the Blu-ray region needs to be changed.

Refer to:

[K000101]

 How do I change the region code?

Kaleidescape Support

For additional help with the installation of a Premiere system, contact Kaleidescape 
Technical Support.

Send email message to 

[email protected]

.

Call the support line at 

+1 (650) 625-6160

.

Be prepared to provide the serial number of the Kaleidescape server (located on the back of 
the server). Serial numbers are printed on labels located on the backs of all components 
and behind the front panels of 1U+ Movie Servers and 3U Servers.

The Kaleidescape website always has the latest support updates.

http://www.kaleidescape.com/support

Summary of Contents for premiere series
















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands