manualshive.com logo in svg

Kaleidescape premiere series, Installation Manual

Share
Download
Kaleidescape premiere series Installation Manual Download Page 152

Kaleidescape Part No. 101-0105-00 Rev 5

Page 152

Kaleidescape Premiere Line Installation Guide

Notices

Kaleidescape M-Class Distribution

This distribution includes software from the following libraries that are licensed 
under the GNU General Public License, Version 2.
Libraries: ALSA, Bison, BusyBox, E2fsprogs, Minicom, GDB, GNU Readline, 
ARMulator, PSIM, SGX Embedded Systems DDK for Linux kernel, Linux Kernel, 
Kernel Headers, cramfs, Udev, Fusion Kernel Module, GStreamer Bad Plug-ins, 
GStreamer Base Plug-ins, NTFS 3G, eCos host tools, Automake, GCC, GNU Libtool, 
GNU M4, FUSE, procps, Intel Media Processor CE 3100 Software Development Kit 
(GPL libraries only).
These libraries are the copyright of the respective authors of these libraries.
You can copy, distribute, or modify these libraries under the terms of the GNU 
General Public License, Version 2.
These libraries are distributed without any warranty. For more details, see the GNU 
General Public License, Version 2.
A source code version of these Programs, as defined in the GNU General Public 
License, Version 2 may be obtained by request sent to [email protected].
A copy of the GNU General Public License, Version 2 is available at 
http://www.gnu.org/licenses/.
—
This distribution includes software from the following libraries that are licensed 
under the GNU General Public License, Version 3.
Libraries: Autoconf, Binary Format Descriptor (BFD), Binutils.
These libraries are the copyright of the respective authors of these libraries.
You can copy, distribute, or modify these libraries under the terms of the GNU 
General Public License, Version 3.
These libraries are distributed without any warranty. For more details, see the GNU 
General Public License, Version 3.
A source code version of these Programs, as defined in the GNU General Public 
License, Version 3 may be obtained by request sent to [email protected].
A copy of the GNU General Public License, Version 3 is available at 
http://www.gnu.org/licenses/.
—
This distribution includes software from the following libraries: GStreamer, libicon, 
libmtp.
These libraries are covered by the GNU Library General Public License, Version 2, a 
copy of which is available at http://www.gnu.org/licenses/.
A source code version of these Libraries, as defined in the GNU Library General 
Public License, Version 2, may be obtained by request sent to 
[email protected].
—
This distribution includes software from the following libraries: libiberty, libusb, 
DirectFB, GLib, GStreamer Good Plug-ins, GNU C Library. GNU C Library Ports, 
libfuse.
These libraries are covered by the GNU Lesser General Public License, Version 2.1, 
a copy of which is available at http://www.gnu.org/licenses/.

Summary of Contents for premiere series
















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands