Kalamazoo Outdoor Gourmet
™
1.800.868.1699 www.KalamazooGourmet.com
11
MAINTENANCE TROUBLESHOOTING
PROBLEM
Burner does not light. Flame is
low when burner is on HIGH.
Burner flame pattern is erratic.
Flame is low when burner is on
HIGH. Flames do not run the
whole length of the tube.
Experiencing Flare-Ups.
Igniters are not working.
CHECK
Is LP fuel low?
Is fuel hose bent or kinked?
Is burner clean?
Is grill on level ground?
Is flow-limiting device activated?
Are you preheating barbecue in
the prescribed manner?
Are the ceramic tiles coated with
burned on grease?
Are the ceramic tiles positioned
over the burner?
Is there no clicking noise when
the igniter button is pressed?
Igniters click, but the igniter
probes are not sparking.
RESOLUTION
Refill LP tank.
Straighten fuel hose and check for leaks
(see page 7).
Burner ports are clogged or blocked. Clean
thoroughly (see “Periodic Cleaning”).
Turn off all burners. Shut off gas supply.
Move grill to level ground.
See “Lighting Instructions”
Turn main burners on high for 10 minutes
for preheating.
See “Periodic Cleaning.”
When grill is turned off and cooled, move
ceramic tile brackets over burner(s).
FIRST CHECK: Wire connections to igniter
modules (inside grill cabinet) and igniter
button (front of grill) are firmly in place.
SECOND CHECK: Replace the 9-volt
battery(s) in the igniter module(s) inside the
grill cabinet.
FIRST CHECK: Wire connections to igniter
modules (inside grill cabinet) are firmly in
place.
SECOND CHECK: Igniter probe (at the
burner) may have shifted. WITH GAS
SUPPLY TURNED OFF, gently adjust or
bend probe closer to burner to gain spark.
If problems cannot be corrected by using these methods, please contact Kalamazoo Outdoor Gourmet Customer
Service at 800-868-1699.
IMPORTANT NOTE ON GAS HOSE:
If it is evident there is excessive abrasion or wear, or the hose is cut, it
must be replaced prior to the outdoor cooking gas appliance being put into operation. The replacement hose
assembly must be obtained from Kalamazoo Outdoor Gourmet
™
.
