6. Maintenance
51
Heat Pure 80 tunnel and Heat Pure 105 tunnel
1.
To clean the pane, press the lifting door
down firmly and completely.
2.
Place the key in the lock situated in the
centre at the top.
3.
Turn the lock to the left until you feel
resistance.
4.
The key can also be slotted into the lip
on the upper right and used to pull the
door open.
5.
The door can now be tilted forward.
6.
Before cleaning the pane, allow the
material to cool down completely, to
prevent any damage. The best way to
clean the glass, is to use the Kal-fire
window cleaner, available at your
dealer.
7.
Use a cloth or piece of paper to remove
the worst soiling from the pane.
8.
Spray the window cleaner onto a cloth
or piece of paper and wipe the pane
clean. Never spray the window cleaner
straight onto the glass!
9.
Wipe over the pane with a damp cloth
afterwards, to remove all traces of the
detergent used.
10.
The deposits will automatically fall into
the combustion chamber due to the
tilted position of the door. The area in
front of the Heat Pure will be kept
clean.
To close the door again, tilt it back and turn the key to the right. The
Heat Pure will be hermetically sealed again by the three-point closure.
