TECHNICAL SPECIFICATIONS
Bend Length
36” (915mm)
Bend Material Thickness
16ga. (1.52mm) mild steel*
20ga. (0.912mm) stainless steel**
Bend Angle
0 – 135 degrees
Box Depth
1.18” (30mm)
Minimum Reverse Bend
.625” (16mm)
Floor Stand
No
Shipping Dimensions (L x W x H)
47”x16’’x22’’
Shipping Weight
271 lbs.
Based on a material tensile strength of *64000 PSI – mild steel
**100000 PSI – stainless steel
DESCRIPTION
The W-3616Z Pan Brake is hand operated and capable of bending up to 16ga. (1.52mm) mild
steel and 20ga. (.912mm) stainless x36” (915mm) long. The machine has 6 removable fingers
and a 1.18” (30mm) box depth allowing it to fabricate pans, boxes, channels, angles, and other
shapes. Adjustable counterweights allow the operator to balance the bending leaf to
correspond to material thickness.
Note: The photos illustrations using in this manual are representative only and may not
depict the actual color, labeling or accessories and may be intended to illustrate technique
only.
Note: The specifications and dimensions presented here are subject to change without prior
notice due to improvements of our product