Kaiser Baas X2, Complete User Manual

Page: 3 / 15

3 4
Disclaimers & Warnings
• DO NOT use the camera in water without
the waterproof case.
• Always check the waterproof case seal is
clean and free of debris prior to use in water.
• Always check the charge port cap on the
waterproof case is tightened fully prior to
use in water.
• IMPORTANT! - The waterproof case
charge port and USB cable are only splash/
water resistant. DO NOT submerge them
underwater. Failure to observe may result
in damage to the camera.
• Always ensure the USB connection is
covered during wet conditions.
• DO NOT attempt to open the camera or
modify it in any way. If the camera has
been opened the warranty will be void.
Maintenance and repairs should only be
performed by Kaiser Baas.
• DO NOT handle or charge the camera
without its waterproof case using wet hands.
Failure to observe this may result in damage
to camera and persons.
• ONLY recharge the camera battery using
the supplied USB cable.
• If using a wall charger, ensure that it is a
certified product for your region. AC Input:
100-240VAC 50/60Hz. DC Output: 5V 1A.
Only use a USB wall charger with suitable
approval and certification. Do not charge in
conditions outside of the 10°C - 45°C range.
If you do not know the voltage and current
of your charger, use the included cable to
charge from your computer.
• The camera should not be used in heat
exceeding 55°C (131°F).
• DO NOT drop, crush, pierce, bend, deform,
microwave, incinerate or shoot the camera.
Before operating
please ensure
you have read
and understood
the safety
precautions