23
EN
Using Your X100 Camera
Preparation
Charging the battery
Before using the X100 camera for the first time you should
fully charge the battery.
Procedure:
1.
Connect X100 camera to a computer (or other USB
power source) using the USB cable (provided)
2.
A: If the Camera is on when charging, 3 red lights will
blink until the battery is fully charged.
B: Only one red light will blink if the camera is off when
charging.
3.
A completely flat battery will take about 5 hours to be
fully charged. The red indicator lights will turn off when
the battery is fully charged.
