11
EN
Video Mode
Once the camera is turned on, it goes to the video capture
mode by default. Press SHOOT button to start recording.
When the recording starts, you will see the red lights start
flashing. To end recording, press the SHOOT button again.
To enter the Settings menu, press the POWER button (press
and release immediately – if it is held too long the camera will
switch off).
Note: the Setup menu is depending on the active mode. If the
“Video mode” is active, it will display video capture settings or
if the “Picture mode” is active, it will display the Image capture
settings. By default, Video mode is the active mode when you
turn the device on.
30fps
00:56:20
Video Mode Screen
