KAESER M27, Operator'S Manual

Page: 171 / 294

Result Have the engine air intake shut-off valve changed if it is heavily worn or malfunctions in any way.
1. Slide the valve onto the flexible hose.
2. Tighten the hose clamp on the motor side.
3. Reposition the air intake hose on the filter side and tighten the hose clamp.
4. Close the canopy.
5. Start the machine and switch to LOAD.
If the engine stops on switching to LOAD, have the valve adjusted by a specialized workshop
or an authorized KAESER service representative.
10.8.5 Option oe
Draining liquid accumulation within the machine
The so-called "closed floor pan" contributes to the protection of the environment by preventing a
contamination of the soil in the event of leaking operating fluids.
Liquid accumulations within the machine's body can also cause corrosion or electrical faults.
Liquid accumulations must be removed as quickly as possible in order to avoid potential machine
faults.
For draining the liquid, maintenance openings have been added to the floor panel of the machine
which are closed with bungs.
Material Receptacle
Cleaning cloth
Precondition The machine is shut down.
The machine is standing level.
The machine is secured against moving.
The machine is fully vented, the pressure gauge reads 0 psig.
The machine is cooled down.
All compressed air consumers are disconnected and the air outlet valves are open.
1. Place a receptacle underneath the maintenance opening(s).
2. Unscrew and remove the bung(s) from the maintenance openings.
The liquid will drain.
3. Clean the bungs and maintenance openings.
4. Close all maintenance openings with bungs.
The machine body is sealed.
5. Using the cleaning cloth, remove any dirt within the machine.
Dispose of collected liquid and contaminated working materials according to environmental
protection regulations.
10 Maintenance
10.8 Maintenance for Optional Items
No.: 9_9548 05 USE
Operator Manual Screw Compressor
M27
161