The engine is filled initially with engine oil of viscosity class SAE 10W–40 .
Ambient temperature [°C]
Viscosity class
20 ..... 50
SAE 40
0 ..... 20
SAE 20W
−15 ..... 0
SAE 10W
−10 ..... 40
SAE 15W–40
−30 ..... 30
SAE 5W–30
−20 ..... 40
SAE 10W–40
Tab. 34 Engine oil recommendation
Recommended oil for engines with diesel particulate filters
The engine oil must meet the following classification:
■ ACEA, class E6
■ API, class CJ-4
Ambient temperature [°C]
Viscosity class
Approved by the
manufacturer.
−20 ..... 40
SAE 10W-40
Shell Rimula Signia
10W-40 *
* Use only engine with low white ash build up.
Tab. 35 Recommended oil for engines with diesel particulate filters
2.7.3 Fuel recommendation
The diesel fuel must meet the requirements of EN 590 and ASTM D975 respectively.
According to these standards a specific portion of bio diesel is permitted in the fuel.
Depending on the country of origin, bio diesel can be produced from different plant materials and
thus have different properties.
Affected by temperature, atmospheric oxygen and time, these bio diesel components in the fuel
may decompose in the fuel and thus cause damages within the fuel system.
The use of other fuels as well as the mixing with additives is only permitted after consultation
with the engine manufacturer.
2.7.4 Engine coolant recommendation
The engine coolant must meet the requirements of specification ASTM D4985.
Do not use a common coolant and/or antifreeze that meets only the requirements of
ASTM D3306. Such coolants are intended only for light use in vehicles and could shorten the
useful life of the engine.
2
Technical Specifications
2.7
Engine
14
Operator manual Portable compressor
M 64
No.: 9_5898 26 E
Option lc
RAMIRENT
