➤ Do not allow the machine to take in toxic, acidic, flammable or explosive gases or vapours.
➤ Do not operate the machine in areas in which specific requirements with regard to explosion
protection are in force.
3.4 User's responsibilities
3.4.1 Observe statutory and universally accepted regulations
These are, for example, nationally implemented European directives and/or applicable national leg‐
islation, safety and accident prevention regulations.
➤ Observe relevant statutory and accepted regulations during installation, operation and mainte‐
nance of the machine.
3.4.2 Determining personnel
Suitable personnel are experts who, by virtue of their training, knowledge and experience as well
as their knowledge of relevant regulations can assess the work to be done and recognize the pos‐
sible dangers involved.
Authorised operators possess the following qualifications:
■ are of legal age,
■ are conversant with and adhere to the safety instructions and sections of the operating manual
relevant to operation,
■ they have received adequate training and authorization to operate electrical and compressed
air devices,
Authorised installation and maintenance personnel have the following qualifications:
■ are of legal age,
■ must have read, be conversant with and adhere to the safety instructions and sections of the
operating manual applicable to installation and maintenance,
■ are fully conversant with the safety concepts and regulations of electrical and compressed air
engineering,
■ are able to recognise the possible dangers of electrical and compressed air devices and take
appropriate measures to safeguard persons and property,
■ have received adequate training in and authorisation for the safe installation and maintenance
of this machine.
➤ Ensure that personnel entrusted with operation, installation and maintenance are qualified and
authorised to carry out their tasks.
3.4.3 Complying with inspection schedules and accident prevention regulations
The machine is subject to local inspection schedules.
Examples of operation in Germany
➤ Carry out recurring inspections to
DGUV Regel 100 – 500, chapter 2.11:
The user must ensure that from a rated motor power greater than 0.5 kW the machine's safety
devices are checked for function at least once annually.
3
Safety and Responsibility
3.4
User's responsibilities
No.: 902350 00E
Operator manual Reciprocating compressor
KCT blue T
13
Summary of Contents for KCT blue T Series
Page 2: ...Original instructions KKW PDENT 2 10 en SBA DENTAL T ANLAGE 20190503 092636...
Page 6: ...Contents iv Operator manual Reciprocating compressor KCT blue T No 902350 00E...
Page 8: ...List of Illustrations vi Operator manual Reciprocating compressor KCT blue T No 902350 00E...
Page 10: ...List of Tables viii Operator manual Reciprocating compressor KCT blue T No 902350 00E...
