KAESER KOMPRESSOREN SX, Service Manual, Page: 63 / 122

Fig. 16 Filter mat for the air and oil cooler
1
Filter mat
No tools are needed to remove the filter mat.
1. Carefully remove the filter mat from the retaining frame.
2. Beat the mat or use a vacuum cleaner to remove loose dirt. If necessary, wash with lukewarm
water and household detergent.
3. Change the filter mat if cleaning is not possible or if the change interval has expired.
4. Carefully insert the filter mat in the retaining frame.
10.4 Cleaning or Replacing the Control Cabinet Filter Mats
Filter mats protect the control cabinet from ingress of dirt. If the filter mats are clogged, adequate
cooling of the components is no longer ensured. In such a case, clean or replace the filter mats.
Material Warm water and household detergent
Spare parts (as required)
Precondition The power supply disconnecting (isolating) device is switched off,
the disconnect device is locked in the off position,
a check has been made that no voltage is present.
The machine has cooled down.
10 Maintenance
10.4 Cleaning or Replacing the Control Cabinet Filter Mats
9_6919 04 E
Service Manual Screw Compressor
SX SIGMA CONTROL BASIC
53