KAESER KOMPRESSOREN SX, Service Manual, Page: 23 / 122

3.4.2 Qualified personnel
These are people who, by virtue of their training, knowledge and experience as well as their knowl‐
edge of relevant regulations can assess the work to be done and recognise the possible dangers
involved.
Authorised operators possess the following qualifications:
■ are of legal age,
■ are conversant with and adhere to the safety instructions and sections of the service manual
relevant to operation,
■ have received adequate training and authorisation to operate electrical and compressed air de‐
vices.
■ Additional qualifications for compressors with refrigeration dryers:
─ Adequate training and authorisation ton refrigeration devices.
Authorised installation and maintenance personnel have the following qualifications:
■ are of legal age,
■ have read, are conversant with and adhere to the safety instructions and sections of the service
manual applicable to installation and maintenance,
■ are fully conversant with the safety concepts and regulations of electrical and compressed air
engineering,
■ are able to recognise the possible dangers of electrical and compressed air devices and take
appropriate measures to safeguard persons and property,
■ have received adequate training and authorisation for the safe installation and maintenance on
this equipment.
■ Additional qualifications for compressors with refrigeration dryers:
─ fully conversant with the safety concepts and regulations concerning refrigeration devices,
─ must be able to recognise the possible dangers of refrigeration devices and take appropriate
measures to safeguard persons and property.
➤ Ensure that operating, installation and maintenance personnel are qualified and authorised to
carry out their tasks.
3.4.3 Adherence to inspection schedules and accident prevention regulations
The machine is subject to local inspection schedules.
Examples of German inspection schedules
➤ Recurring inspections according to BGR 500, chapter 2.11.
The user must ensure that the machine's safety devices are checked for function as required or
at least annually.
➤ Oil changing according to BGR 500, chapter 2.11.
The user must ensure that the cooling oil is changed as required or at least annually and the oil
change must be documented. This requirement may be waived if an oil analysis proves that the
oil is still usable.
3 Safety and Responsibility
3.4 User's Responsibilities
9_6919 04 E
Service Manual Screw Compressor
SX SIGMA CONTROL BASIC
13