3. Press the «DOWN» key.
The maintenance interval for oil change is displayed as active line.
6 . 1 b a r
0 8 : 1 5 A M
8 0 ° C
Header
4 Maintenance
Oil change
Maintenance interval description
4000h¦
0150h
Reset:
☐
Active line, factory-defined interval
·········
Air filter
3000h¦
0150h
Reset:
☐
Prefilter changed:
☐
4. Press the «Enter» key.
The setting mode is active.
5. Use the «Up» or «Down» keys to set the new value for the maintenance interval.
Hold down the «Up» key to change the maintenance interval in increments of 10, 100 or
1000.
6. Press the «Enter» key.
The setting is applied.
7. Press the «Escape» key repeatedly to return to the main menu.
9.11 Resetting the maintenance interval counter
Whenever maintenance has been carried out, the associated maintenance counter must then
be reset so that the countdown towards the next maintenance task can begin accordingly.
Example: Resetting the oil change maintenance counter.
Precondition Access level 2 is activated
The operating mode is displayed
The applicable maintenance task has been carried out in accordance with the stipulations of the
manufacturer
Maintenance menu
1. Open the menu 4
Maintenance.
2. Using the «Up» or «Down» keys, select the line
Oil change.
9
Operation
9.11 Resetting the maintenance interval counter
188
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.0.X
No.: 9_9450 12 E
