7. Press «Enter».
The display for hours,
00:00 flashes.
8. Use «Up» or «Down» to set the hours.
9. Press the «Right» arrow.
10. The display for minutes, 00:
00 flashes.
11. Use «Up» or «Down» to set the minutes.
12. Press the «Enter» key.
The setting is applied.
6 . 1 b a r
0 8 : 1 5 A M
8 0 ° C
Header
6 Compressor clock
Menu
·········
01
Mon-Fri
06:30AM
on
Switching point 01 is set
02
Mon-Fri
12:00PM
off
Switching point 02 is set
03
Mon-Fri
01:00PM
on
Switching point 03 is set
04
Mon-Thu
05:00PM
off
Switching point 04 is set
05
Fri
03:00PM
off
Switching point 05 is set
13. Press the «Right» arrow.
14. Press «Enter».
The
on/off indicator flashes.
15. Use «Up» or «Down» to set the Compressor On action.
16. Press «Enter».
The setting is applied.
The Compressor ON action is set for the first switching point.
17. Set the other switching points in the same manner.
Result Weekdays, time and the Compressor ON/Compressor OFF actions are set for all switching points
of the user-defined clock program.
8.6.1.3 Activate the «Timer» key
1. Use «Up» or «Down» to select the
Key clock line.
2. Press «Enter».
The check box
Key clock will flash.
6 . 1 b a r
0 8 : 1 5 A M
8 0 ° C
Header
6 Compressor clock
Menu
Key clock
: ☑
Active line with deactivated check box
Reset
: ☐
01
Mon-Fri
06:30AM
on
Switching point 01:
02
Mon-Fri
12:00PM
off
Switching point 02
03
Mon-Fri
01:00PM
on
Switching point 03
3. Press the «Up» key.
The check box is activated.
8
Initial Start-up
8.6
Machine start and machine stop
No.: 9_9450 12 E
User Manual Controller
SIGMA CONTROL 2 SCREW FLUID ≥5.0.X
97
