Option:
Task
D
ai
ly
A
25
0
A
50
0
S
ee
c
ha
pt
er
N
ot
e
Blow out the spark arrester with
compressed air.
X
EL = Qualified electrician
KS = Contact KAESER SERVICE; SW = Contact specialized workshop
Tab. 74 Regular maintenance task options
10.4 Drive engine maintenance
➤ Conduct maintenance tasks in accordance with the maintenance schedule in Chapter 10.3.4.1.
10.4.1 Coolant cooler maintenance
Material Coolant
Coolant tester
Receptacle
Funnel
Cleaning cloth
Precondition The machine is switched off.
The machine is standing level.
The machine is fully vented, the pressure gauge reads 0 psig.
The machine has cooled down.
All compressed air consumers are disconnected and the air discharge valves are open.
Risk of scalding from hot coolant!
Serious injuries can be caused by hot coolant.
➤ Allow the machine to cool down before opening the cooling system.
Risk of chemical burns from coolants containing antifreeze!
➤ Avoid eye and skin contact with coolant. In case of contact, rinse immediately with run‐
ning water.
➤ Wear protective glasses and gloves.
10 Maintenance
10.4 Drive engine maintenance
104
Operator Manual Portable Rotary Screw Compressor
MOBILAIR M58utility SIGMA CONTROL SMART
No.: 901779 08 USE
