5. Loosen the parking brake (turn the crank).
6. Remove the chocks.
Secure the chocks in the corresponding transport securing devices before towing. Replace
any missing chocks immediately.
Preparing the machine for transport (height-adjustable chassis with compressed air brake and
ABS):
Fig. 98 Supply lines compressed air brake and ABS
1
Parking socket for ABS connection cable,
cable attached
2
Parking socket for supply line (red) com‐
pressed air brake, line attached
3
Parking socket for brake line (yellow com‐
pressed air brake, line attached
4
Socket, lighting system
1. Check that the tow bar is adjusted to the correct height. (see also chapter 6.4.2)
Check if:
■ The teeth in the tow bar height adjusting joints are fully engaged
■ The locking levers are tightened
■ The security pin is fully inserted.
2. Prepare the jockey wheel for transport (see Ill. 97, Figure b).
■ Lift the jockey wheel just below the stop.
■ Pull the fixing lever forward (disengage).
■ Lift the jockey wheel and hang the fixing lever in the transport hook.
3. Check that the wheels are securely fitted and the tires are in good condition.
4. Check the tire pressures.
5. Connect the brake line hoses:
■ first brake line (yellow)
■ then supply line (red)
6. Connect the ABS cable.
7. Connect the cable for the lighting and indicator systems and carry out a function check.
8. Loosen the parking brake (turn the crank).
9. Remove the chocks.
12 Decommissioning, Storage and Transport
12.2 Transport
No.: 9_9570 07 USE
Operator Manual Screw Compressor
M250 SIGMA CONTROL MOBIL
267
Option rb/rm/rr
Option rb/rm/rr