![background image](http://html1.mh-extra.com/html/kaeser-kompressoren/hbpi-pr/hbpi-pr_installation-and-operating-manual_3172311025.webp)
3 Safety and Responsibility
3.1 Basic instructions
The machine is manufactured to the latest engineering standards and acknowledged safety regula‐
tions. Nevertheless, dangers can arise through its operation:
■ Danger to life and limb of the operator or third parties,
■ Damages to the machine and other material assets.
Disregard of warning or safety instructions can cause serious injuries!
➤ Read the operating and installation manual carefully and take note of the contents for safe ma‐
chine operation.
➤ Use this machine only if it is in a technically perfect condition and only for the purpose for
which it is intended; observe all safety measures and the instructions in the service manual!
➤ Immediately rectify (have rectified) any faults that could be detrimental to safety!
3.2 Specified use
The machine is designed exclusively for the generation of pressure in a commercial or industrial
environment where air (in the following "compressed air") as delivery medium is approved for use.
Any other use is considered incorrect. The manufacturer is not liable for any damages that may
result from incorrect use. The user alone is liable for any risks incurred.
➤ Comply with the instructions in this operating manual.
➤ Operate the machine only within its performance limits and under the permitted ambient condi‐
tions.
➤ Do not use compressed air for breathing purposes unless it is specifically treated.
➤ Do not use compressed air for any application that will bring it into direct contact with food
products unless it is specifically treated.
➤ Operate the blower block only with inlet and outlet ports connected.
3.3 Improper use
Improper usage can cause damage to property and/or (severe) injuries.
➤ Only use the machine as intended.
➤ Never direct compressed air at persons or animals.
➤ Use hot cooling air for heating purposes only if there is no risk to the health of humans or ani‐
mals. If necessary, hot cooling air should be treated by suitable means.
➤ Do not allow the machine to take in toxic, acidic, flammable, or explosive gases or vapors.
➤ Do not operate the machine in areas in which specific requirements with regard to explosion
protection are in force.
➤ Intake of solid particles >0.004 inch is not permitted.
3
Safety and Responsibility
3.1
Basic instructions
Number: 9_9572 28 USE
Installation and Operating Manual Rotary lobe blower
HBPI pr
15