Kaba SLA Operating Instructions Manual Download Page 4

Page: 4 / 50

0639-990-21---30j_2010.07.indd

SLA

0639-990/22j

Page 4 of 46

Operating instructions

GenerAL remArkS

The following documents are associated with this installation:

• Operating instructions

0639-990/22

onto the installation

• Operator manual

0639-991/02

by the operator

• Control booklet

0639-991/12

onto the installation

The present instructions contains all instructions for commissioning, operation, service

(maintenance/checking) as well as troubleshooting and are the basis which guarantees a

faultless and safe operation of the installation.

They must be completely read and understood before starting the work.

1.1

Target group

All the work described in the present instructions must only be carried out by competent

specialists!

Competent specialists are persons who, based on their professional training and ex

perience, have sufficient knowledge in the field of powered windows, doors and gates.

They are sufficiently familiar with the relevant federal regulations for work protection and

accident prevention, with the guidelines and generally recognized rules applicable for this

field of technology which enables them to evaluate if powered windows, doors and gates

can be safely operated.

Only the trained experts of the manufacturer or the supplier are counted among these

persons.

1.2

Where to keep these instructions

The present instructions have to be kept close to the installation, together with the control

booklet!

1.3

Adresses

Distribution agent/

After-sales service

manufacturer

kaba Gilgen AG

freiburgstrasse 34

Ch-3150 Schwarzenburg

Phone +41 31 734 41 11

Fax

+41 31 734 43 79

www.kaba-gilgen.ch

[email protected]

Summary of Contents for SLA



















































Search results

Summary of Contents for SLA

Reviews:

Related manuals for SLA

Brands by name

Popular brands

Kaba SLA, Operating Instructions Manual

Search results

Summary of Contents for SLA

Reviews:

Related manuals for SLA

Brands by name

Popular brands